|
TEAK FIRE EXTINGUISHER BOX - $125., UNFINISHED
The fire extinguisher pocket box has a teak frame, doweled
and epoxied, and teak marine plywood box, nailed and epoxied. These are exact duplicates of the boxes used in the classic
1980's boats. The outside frame measures 18 1/2" x 7 1/2", the box is 5 15/16" wide x 17 1/2" tall, and
5" deep, outside dimensions. Mounting holes are pre-drilled, and stainless steel screws are included.
CLICK FOR MORE PHOTOS
_____________________________________
OUTRAGE COOLER CLEATS - $100/pair, UNFINISHED
Made from FEQ (Finest European Quality) 5/4" teak. They are 15" long, and about 4 1/16" at the widest.
These are exact duplicates of the originals.
CLICK FOR MORE PHOTOS
_____________________________________
17' MONTAUK SUMP COVER - $30., UNFINISHED
Made from A-1, 1/2" teak plywood. They measure 9" X 7 7/8".
The veneer is thin, so I recommend they be varnished, not oiled.
____________________________________
18' & 20' OUTRAGE SUMP COVER - $35., UNFINISHED
Made from A-1, 1/2" teak plywood. They measure 11 13/16"
X 9 7/16". The veneer is thin, so I recommend they be varnished, not oiled.
____________________________________
22' OUTRAGE SUMP COVER (2 piece) - $50., UNFINISHED
These are the two piece style. The piece with the lift hole measures 6" x 11 1/2", the other is 6 1/4"
x 11 1/2". Let me know if you need the port or starboard side, port shown. They are made from A-1, 1/2" teak plywood.
The veneer is thin, so I recommend they be varnished, not oiled.
_____________________________________
22' OUTRAGE WHALER DRIVE SUMP COVER (3 piece) - $70., UNFINISHED
Made from A-1, 1/2" teak plywood. The veneer is thin, so I recommend they be varnished, not oiled. The finger hole
is included in the price. Additional $15. for custom drilling of other holes.
_____________________________________
OUTRAGE UNDER-GUNWALE ROD RACK/HOLDERS - $150./Set of 4, UNFINISHED
Three-hook Outrage rod rack/holders made from 3/4" Philippine Mahogany plywood (11 ply). Duplicates of the originals,
hook pattern a direct copy. They measure 4" x 15" for Outrage 18's, and 4" x 17 3/16" for 20's up. All
edges eased, ready for finish.
CLICK FOR MORE PHOTOS
_____________________________________
TEAK STERN LIGHT HOLDER BLOCKS - $20., UNFINISHED
2 1/2" square, 3/4" teak stern light holder block. Available
with, or without 3/4" or 1 1/4" Beckson clip. $20 for the block only. $25 with the clip installed.
_____________________________________
OUTRAGE TEAK STERN LIGHT BASE BLOCK - $35., UNFINISHED
3 1/4" X 3 1/2" teak stern light block. BW Part
#62340100
_____________________________________
|
